[sylpheed:35688] Re: Sylpheed compile error on Windows/MinGW
HAYASHI Kentaro
kenhys at gmail.com
Sun Jul 7 19:14:06 JST 2013
Hi,
I've not ever used Sylpheed as portable, but what about renaming
sample-sylpheed.ini to sylpheed.ini?
In such a way, Sylpheed zip package stores configuration files into
specific config directory.
2013/7/7 Ho Sy Tan <hosytan at gmail.com>
> Thank you for your advice.
>
> The reason that I like to build Sylpheed by myself is I want to run
> Sylpheed on special USB device.
> Can I change Sylpheed source so it stored profile/mail data on a special
> patition (need use my driver software), nnly Sylpheed can read /write to
> this partition?
> There are too many viruses/malwares in my company network, so I want
> Sylpheed runs on a separate drive, viruses malwares cannot infect to this
> USB device.
>
> To compile Sylpheed 3.3.0 on MinGW, do I need to recompile OpenSSL for
> MinGW? What vision of OpenSSL should I choose for Sylpheed 3.3.0?
>
>
>
>
> On Sun, Jul 7, 2013 at 1:42 PM, HAYASHI Kentaro <kenhys at gmail.com> wrote:
>
> > Hi,
> >
> > I don't know why ./makewin32.sh fails, but
> > I guess that generated .def file contains two EXPORTS section in
> > libsylph-0-1.dll.def.
> >
> > libsylph/.libs/libsylph-0-1.dll.def
> >
> > EXPORTS
> > ; GENERATED FILE LIST HERE
> > EXPORTS^M
> > account_address_exist @ 1
> > .....
> >
> > If so, just remove the line of comment from libsylph/libsylph-0.def
> >
> > ; LINE OF COMMENT IN HEAD OF .def FILE
> > EXPORTS
> >
> > It seems that ";" line is not handled properly.
> >
> > By the way, why do you want to compile sylpheed in mingw environment by
> > yourself?
> > It seems that configuration results shows OpenSSL feature is not detected
> > yet.
> > I remember for it was a bit troublesome compiling sylpheed on your own.
> > Is there a particular reason?
> >
> > Thanks.
> >
> >
> > 2013/7/7 Ho Sy Tan <hosytan at gmail.com>
> >
> > > Hello,
> > >
> > > I try to compile Sylpheed on Windows/MinGW but have some errors.
> > > My system is built reference
> > > http://sylpheed.sraoss.jp/wiki/index.php?Sylpheed% 2FWin32.
> > >
> > > My system is as follows:
> > > - Windows XP Pro SP2.
> > > - I installed the MinGW + MSYS (run mingw-get-inst-20120426.exe from
> > >
> > >
> >
> http://sourceforge.net/projects/mingw/files/Installer/mingw-get-inst/mingw-get-inst-20120426/
> > > with
> > > the option to upgrade the latest package, MSYS, MSYS Development Tool
> > Kit).
> > > - GTK (gtk +-bundle_2.24.10-20120208_win32 from
> > > http://www.gtk.org/download/win32.php).
> > >
> > > I've ran following commands:
> > >
> > > $ cd / home/sylpheed-3.3.0 /
> > > $. / configure
> > >
> > > At this point, I think everything is OK.
> > > The output is as follows:
> > >
> > >
> > > ...
> > > ...
> > > ...
> > > sylpheed 3.3.0
> > >
> > > GnuPG : no
> > > JPilot : no
> > > LDAP : no
> > > OpenSSL : no
> > > iconv : yes
> > > compface : no
> > > IPv6 : yes
> > > GtkSpell : no
> > > Oniguruma : no
> > > GThread : yes
> > >
> > > The binary will be installed in /usr/local/bin
> > >
> > > Configure finished, type 'make' to build.
> > >
> > > I tried to make:
> > > $ make
> > >
> > > I get an error at this step, the output is as follows:
> > >
> > > ...
> > > ...
> > > ...
> > >
> > >
> >
> e:/run/builder/mingw/bin/../lib/gcc/mingw32/4.7.2/../../../../mingw32/bin/ld.exe
> > > : .libs/libsylph-0-1.dll.def:3: syntax error
> > >
> > >
> >
> e:/run/builder/mingw/bin/../lib/gcc/mingw32/4.7.2/../../../../mingw32/bin/ld.exe
> > > :.libs/libsylph-0-1.dll.def: file format not recognized; treating as
> > linker
> > > scri
> > > pt
> > >
> > >
> >
> e:/run/builder/mingw/bin/../lib/gcc/mingw32/4.7.2/../../../../mingw32/bin/ld.exe
> > > :.libs/libsylph-0-1.dll.def:2: syntax error
> > > collect2.exe: error: ld returned 1 exit status
> > > make[3]: *** [libsylph-0.la] Error 1
> > > make[3]: Leaving directory `/home/sylpheed-3.3.0/libsylph'
> > > make[2]: *** [all] Error 2
> > > make[2]: Leaving directory `/home/sylpheed-3.3.0/libsylph'
> > > make[1]: *** [all-recursive] Error 1
> > > make[1]: Leaving directory `/home/sylpheed-3.3.0'
> > > make: *** [all] Error 2
> > >
> > > If I try to makewin32, this output:
> > > $ ./makewin32.sh
> > > configure: WARNING: you should use --build, --host, --target
> > > configure: WARNING: you should use --build, --host, --target
> > > configure: WARNING: invalid host type: Tan/dist
> > > checking build system type... Invalid configuration `Sy': machine `Sy'
> > not
> > > recog
> > > nized
> > > configure: error: /bin/sh ./config.sub Sy failed
> > >
> > > Please give me some solutions for this error.
> > >
> > > Thanks in advance.
> > >
> > >
> > > On Sun, Jul 7, 2013 at 11:32 AM, Ho Sy Tan <hosytan at gmail.com> wrote:
> > >
> > > > Hello,
> > > >
> > > > I try to compile Sylpheed on Windows/MinGW but have some errors.
> > > > My system is built reference
> > > > http://sylpheed.sraoss.jp/wiki/index.php?Sylpheed% 2FWin32.
> > > >
> > > > My system is as follows:
> > > > - Windows XP Pro SP2.
> > > > - I installed the MinGW + MSYS (run mingw-get-inst-20120426.exe from
> > > >
> > >
> >
> http://sourceforge.net/projects/mingw/files/Installer/mingw-get-inst/mingw-get-inst-20120426/withtheoptionto upgrade the latest package, MSYS, MSYS Development Tool
> > > > Kit).
> > > > - GTK (gtk +-bundle_2.24.10-20120208_win32 from
> > > > http://www.gtk.org/download/win32.php).
> > > >
> > > > I've ran following commands:
> > > >
> > > > $ cd / home/sylpheed-3.3.0 /
> > > > $. / configure
> > > >
> > > > At this point, I think everything is OK.
> > > > The output is as follows:
> > > >
> > > >
> > > > ...
> > > > ...
> > > > ...
> > > > sylpheed 3.3.0
> > > >
> > > > GnuPG : no
> > > > JPilot : no
> > > > LDAP : no
> > > > OpenSSL : no
> > > > iconv : yes
> > > > compface : no
> > > > IPv6 : yes
> > > > GtkSpell : no
> > > > Oniguruma : no
> > > > GThread : yes
> > > >
> > > > The binary will be installed in /usr/local/bin
> > > >
> > > > Configure finished, type 'make' to build.
> > > >
> > > > I tried to make:
> > > > $ make
> > > >
> > > > I get an error at this step, the output is as follows:
> > > >
> > > > ...
> > > > ...
> > > > ...
> > > >
> > > >
> > >
> >
> e:/run/builder/mingw/bin/../lib/gcc/mingw32/4.7.2/../../../../mingw32/bin/ld.exe
> > > > : .libs/libsylph-0-1.dll.def:3: syntax error
> > > >
> > > >
> > >
> >
> e:/run/builder/mingw/bin/../lib/gcc/mingw32/4.7.2/../../../../mingw32/bin/ld.exe
> > > > :.libs/libsylph-0-1.dll.def: file format not recognized; treating as
> > > > linker scri
> > > > pt
> > > >
> > > >
> > >
> >
> e:/run/builder/mingw/bin/../lib/gcc/mingw32/4.7.2/../../../../mingw32/bin/ld.exe
> > > > :.libs/libsylph-0-1.dll.def:2: syntax error
> > > > collect2.exe: error: ld returned 1 exit status
> > > > make[3]: *** [libsylph-0.la] Error 1
> > > > make[3]: Leaving directory `/home/sylpheed-3.3.0/libsylph'
> > > > make[2]: *** [all] Error 2
> > > > make[2]: Leaving directory `/home/sylpheed-3.3.0/libsylph'
> > > > make[1]: *** [all-recursive] Error 1
> > > > make[1]: Leaving directory `/home/sylpheed-3.3.0'
> > > > make: *** [all] Error 2
> > > >
> > > > If I try to makewin32, this output:
> > > > $ ./makewin32.sh
> > > > configure: WARNING: you should use --build, --host, --target
> > > > configure: WARNING: you should use --build, --host, --target
> > > > configure: WARNING: invalid host type: Tan/dist
> > > > checking build system type... Invalid configuration `Sy': machine
> `Sy'
> > > not
> > > > recog
> > > > nized
> > > > configure: error: /bin/sh ./config.sub Sy failed
> > > >
> > > > Please give me some solutions for this error.
> > > >
> > > > Thanks in advance.
> > > >
> > > > --
> > > > Thanks & Best Regards,
> > > >
> > > >
> > >
> >
> ---------------------------------------------------------------------------
> > > >
> > > > Fullname: *Ho Sy Tan*
> > > > Mobile: (+84) *0902 231 360*
> > > > Email: *hosytan at gmail.com*
> > > >
> > >
> > >
> > >
> > > --
> > > Thanks & Best Regards,
> > >
> > >
> >
> ---------------------------------------------------------------------------
> > >
> > > Fullname: *Ho Sy Tan*
> > > Mobile: (+84) *0902 231 360*
> > > Email: *hosytan at gmail.com*
> > >
> >
> >
> >
> > --
> > HAYASHI Kentaro <kenhys at gmail.com>
> >
>
>
>
> --
> Thanks & Best Regards,
>
> ---------------------------------------------------------------------------
>
> Fullname: *Ho Sy Tan*
> Mobile: (+84) *0902 231 360*
> Email: *hosytan at gmail.com*
>
--
HAYASHI Kentaro <kenhys at gmail.com>
More information about the Sylpheed
mailing list