[pgpool-general: 2652] Re: pgpool-II 3.3.3, 3.2.8, 3.1.11, 3.0.15, and pgpoolAdmin 3.3.1 released
Alexandru Cardaniuc
cardaniuc at gmail.com
Tue Mar 25 12:49:09 JST 2014
Looks like there is a typo in pgpool.spec file.
When building:
+ ./configure --build=x86_64-redhat-linux-gnu
--host=x86_64-redhat-linux-gnu --target=x86_64-redhat-linux-gnu
--program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin
--sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share
--includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec
--localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man
--infodir=/usr/share/info --with-pgsql-includedir=/usr/pgsql-8.4/include/
--with-pgsql-lib=/usr/pgsql-8.4/lib --disable-static --with-pam
--disable-rpath --sysconfdir=/etc/pgpool-II/
configure: WARNING: unrecognized options: --with-pgsql-lib
Instead of:
%build
%configure --with-pgsql-includedir=%{pghome}/include/ \
--with-pgsql-lib=%{pghome}/lib \
--disable-static --with-pam --disable-rpath \
--sysconfdir=%{_sysconfdir}/pgpool-II/
Should be:
%build
%configure --with-pgsql-includedir=%{pghome}/include/ \
--with-pgsql-libdir=%{pghome}/lib \
--disable-static --with-pam --disable-rpath \
--sysconfdir=%{_sysconfdir}/%{name}/
On Mon, Mar 24, 2014 at 4:15 PM, Yugo Nagata <nagata at sraoss.co.jp> wrote:
> Pgpool Global Development Group is pleased to announce the availability
> of pgpool-II 3.3.3, 3.2.8, 3.1.11, 3.0,15, and pgpoolAdmin 3.3.1. These
> are the latest stable minor versions of each major versions of pgpool-II.
>
> You can download the source code, installer, RPMs from:
> http://pgpool.net/mediawiki/index.php/Downloads
>
>
> ===============================================================================
> pgpool-II 3.3.3, 3.2.8, 3.1.11, 3.0,15
>
> ===============================================================================
>
> * installer: Fix bug that install of pgpool-II RPM fails (Yugo Nagata)
> [3.3][3.2][3.1][3.0]
>
> * installer: Fix to set up passwordless SSH from apache at localhost to
> postgres at localhost (Yugo Nagata) [3.3]
>
> * Fix bug that restarted pgpool's watchdog status is regarded as down
> (Yugo Nagata) [3.3]
>
> * doc: Add mention about "listen queue" and how to increase the "backlog"
> in the num_init_children section. (Tatsuo Ishii) [3.3][3.2][3.1][3.0]
>
> * Fix bug that watchdog status goes down even when only one of trusted
> servers get unpingable (Yugo Nagata) [3.3][3.2]
>
> * Fix bad performance of unlogged tables detection code. (Tatsuo Ishii)
> [3.3][3.2][3.1][3.0]
>
> Pointed out at [pgpool-hackers: 435][[pgpool-general:2325].
>
> * Fix primary node detection logic. (Tatsuo Ishii) [3.3][3.2][3.1][3.0]
>
> There's a possibility that primary node is not detected. This happens
> in following situation. node 0: primary, node 1: standby. Node 0 goes
> down. Health checking detects the fact but local status is not updated
> yet. Primary node finding (find_primary_node) runs. Node 0's status is
> yet healthy. Because find_primary_node fails to connect to node 0, it
> immediately returns -1 and fails to find that fact that node 1 is now
> primary.
>
> Fix is just continuing to look for primary node when fails to connect
> to a node.
>
> Per [pgpool-general: 2409].
>
> * Add raw mode support to pgpool_setup. (Tatsuo Ishii) [3.3]
>
> * test: Integrate jdbc test to regression test. (Tatsuo Ishii) [3.3]
>
> * Fix jdbc DML fails when operated in raw mode and auto commit is off.
> (Tatsuo Ishii) [3.3][3.2][3.1][3.0]
>
> This is reported in bug #92.
>
> * Fix to output error message when wd_escalation_command fails with exit
> code other than 0 (Yugo Nagata) [3.3]
>
> This is suggested by Sergey Arlashin in [pgpool-general: 2457].
>
> * test: Add new regression test for query cache. (Tatsuo Ishii) [3.3][3.2]
>
> * Fix query cache bug with extended protocol. (Tatsuo Ishii) [3.3][3.2]
>
> SELECT retrieves outdated cache even DML was executed in an expilicit
> transaction. The bug had been there since in memory query cache was
> born. Per [pgpool-general-jp: 1252].
>
> * Add missing entries "relcache_size" and "check_temp_table" to show
> pool_status (Tatsuo Ishii) [3.3][3.2]
>
> * Fix to output error message when if_up_cmd fails. (Yugo Nagata) [3.3]
>
> This is suggested by Sergey Arlashin in [pgpool-general: 2457].
>
> * Avoid to send queries to unrelated nodes in streaming replication mode.
> (Tatsuo Ishii) [3.3][3.2][3.1][3.0]
>
> Pgpool-II sends certain queries, such as BEGIN, END and SET commands to
> all of DB nodes. However in streaming replication mode, only primary
> node and at most one standby node are only concerned (if primacy node
> is selected as the load balance node, only 1 node is concerned).
>
> See [pgpool-hackers: 464] for more details.
>
> * Fix possible buffer overrun problem and memory leak. (Tatsuo Ishii)
> [3.3][3.2][3.1][3.0]
>
> Per Coverity 1111465 and 1111482.
>
> * Fix possible buffer overrun. (Tatsuo Ishii) [3.3][3.2][3.1]
>
> Replace strcpy() with strlcpy(). Per Coverity report 1111478, 1111480,
> 1111481.
>
> * Add dubug messages for analyzing errors in if_up_cmd (Yugo Nagata)
> [3.3]
>
> * Fix freeing NULL. (Tatsuo Ishii) [3.3][3.2][3.1][3.0]
>
> Per Coverity 1111384.
>
> * Do not enable query cache on materialized views. (Tatsuo Ishii)
> [3.3][3.2]
>
> Per bug #95.
>
> * Fix memory leak. (Tatsuo Ishii) [3.3][3.2][3.1][3.0]
>
> Per Coverity 1111446.
>
> * Fix a segmentation fault in parallel mode with system_db_hostname is
> empty (Yugo Nagata) [3.3][3.2][3.1][3.0]
>
> * Fix to output debug messages in processing pgpool.conf with -d option
> (Yugo Nagata) [3.3][3.2][3.1][3.0]
>
> Previously, some debug messages in pool_get_config() ware not output
> even when -d option was used.
>
> * Fix JDBC exception of prepared statement including now() in
> replication mode (Yugo Nagata) [3.3][3.2][3.1][3.0]
>
> With JDBC, when a prepared statement is executed more than
> PrepareThreshold times, the statement is named and Describe message
> is sent after Parse. With named statement, pgpool rewrite now() to
> parameter in replication mode. Hence, rewritten query has additonal
> parameter than original. In this case, ParameterDescription message
> sent to frontend (response of Describe) should include OIDs of the
> same number os original query's parameters. Otherwize, JDBC throws
> ArrayIndexoutOfBoundsException.
>
> This is reported in [pgpool-general-jp: 1192].
>
> * Fix backend error of prepared statement about table which has
> column whoes default value is now() in replication mode (Yugo Nagata)
> [3.3][3.2][3.1][3.0]
>
> When pgpool parses a named prepared statement with default now(),
> timestamps are replaced to additional parameters. So, Bind message also
> should inclued additional parameter format codes. However, when the
> number of original parameter was one, pgpool didn't handle this. This
> caused a error like "incorrect binary data format in bind parameter 2".
>
> * test: Fix a bug of regression test of JDBC that shows OK even when
> this fails (Yugo Nagata) [3.3]
>
> * test: Add a new regression test for JDBC's PrepareThreshold
> (Yugo Nagata) [3.3]
>
> * doc: Add description about parallel mode doesn't support PREPARE
> (Yugo Nagata) [3.3][3.2][3.1][3.0]
>
> Per bug #93
>
>
> ===============================================================================
> pgpoolAdmin 3.3.1
>
> ===============================================================================
>
> * Fix a bug that watchdug status is shown as "Unknown" when it's "Down"
> (Yugo Nagata)
>
> * Fix a bug that restart of PostgreSQL doesn't work (Yugo Nagata)
>
> * Fix to get properly if the login user is a super user or not on backend
> nodes. (Nozomi Anzai)
>
> This problem could be occured especially when he isn't a super user.
> Per [pgpool-general: 2340].
>
> * Fix that pgpool_pgctl can be executed only when the login user is super
> user in backend nodes.(Nozomi Anzai)
>
> Previously, any login user was able to try to execute pgpool_pgctl()
> which could stop/restart/reload a backend node even if he was not a super
> user. Also pgpool_pgctl() was executed by sr_check_user or
> health_check_user,
> but it wasn't reasonable. This update is that buttons of
> stop/restart/reload
> are disabled when the login user isn't a super user and that
> pgpool_pg_ctl()
> is executed by login user instead of sr_check_user or health_check_user
> who don't have to be non-superuser. Per [pgpool-general: 2338].
>
> --
> Yugo Nagata <nagata at sraoss.co.jp>
> _______________________________________________
> pgpool-general mailing list
> pgpool-general at pgpool.net
> http://www.pgpool.net/mailman/listinfo/pgpool-general
>
--
Sincerely yours,
Alexandru Cardaniuc
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pgpool.net/pipermail/pgpool-general/attachments/20140324/61cca6e4/attachment.htm>
More information about the pgpool-general
mailing list