<div dir="ltr">Hello,<div><br></div><div>I am trying to set load_balance_mode =  off setting in one testing 2 nodes cluster. The option is currently set to on. It is a setting that requires a full restart in order to be changed.</div><div><br></div><div>I haven&#39;t found a solution that does not provoke downtime on my setup.</div><div><br></div><div>If I restart pgpool on the master node the watchdog is failed over to the secondary, then master will refuse to join the cluster with pgpool logs spitting the following error:</div><div><br></div><div>FATAL:  configuration error. The configurations on master node is different<br></div><div><br></div><div>Then the master will shut down, every time I start the now old master it will refuse to join the cluster because settings are different. In this situation I just have one node running pgpool so if I restart this node it will stop accepting connections through the virtual IP and downtime will occur.</div><div><br></div><div>The other strategy I tried is restart pgpool on the secondary node first. In this case I also got the same error, and the secondary node refuses to join the cluster too.</div><div><br></div><div>I&#39;d like to know what is the ideal procedure in order to change one of those settings without having downtime.</div><div><br></div><div>Many thanks for your time.</div><div><br></div><div>Jacobo García.</div><div><br></div><div><br></div><div><br></div></div><div dir="ltr">-- <br></div><div data-smartmail="gmail_signature"><div dir="ltr">Jacobo García López de Araujo.</div></div>