# ---------------------------- # pgPool-II configuration file # ---------------------------- # # This file consists of lines of the form: # # name = value # # Whitespace may be used. Comments are introduced with "#" anywhere on a line. # The complete list of parameter names and allowed values can be found in the # pgPool-II documentation. # # This file is read on server startup and when the server receives a SIGHUP # signal. If you edit the file on a running system, you have to SIGHUP the # server for the changes to take effect, or use "pgpool reload". Some # parameters, which are marked below, require a server shutdown and restart to # take effect. # #------------------------------------------------------------------------------ # CONNECTIONS #------------------------------------------------------------------------------ # - pgpool Connection Settings - listen_addresses = '*' # Host name or IP address to listen on: # '*' for all, '' for no TCP/IP connections # (change requires restart) port = 9999 # Port number # (change requires restart) socket_dir = '/tmp' # Unix domain socket path # The Debian package defaults to # /var/run/postgresql # (change requires restart) # - pgpool Communication Manager Connection Settings - pcp_port = 9898 # Port number for pcp # (change requires restart) pcp_socket_dir = '/tmp' # Unix domain socket path for pcp # The Debian package defaults to # /var/run/postgresql # (change requires restart) # - Backend Connection Settings - backend_hostname0 = 'server0' # Host name or IP address to connect to for backend 0 backend_port0 = 5432 # Port number for backend 0 backend_weight0 = 1 # Weight for backend 0 (only in load balancing mode) backend_data_directory0 = '/opt/postgres/9.2/data' # Data directory for backend 0 backend_flag0 = 'ALLOW_TO_FAILOVER' # Controls various backend behavior # ALLOW_TO_FAILOVER or DISALLOW_TO_FAILOVER # backend_hostname1 = 'server1' backend_port1 = 5432 backend_weight1 = 1 backend_data_directory1 = '/opt/postgres/9.2/data' backend_flag1 = 'ALLOW_TO_FAILOVER' #backend_hostname1 = 'host2' #backend_port1 = 5433 #backend_weight1 = 1 #backend_data_directory1 = '/data1' #backend_flag1 = 'ALLOW_TO_FAILOVER' # - Authentication - enable_pool_hba = off # Use pool_hba.conf for client authentication authentication_timeout = 60 # Delay in seconds to complete client authentication # 0 means no timeout. # - SSL Connections - ssl = off # Enable SSL support # (change requires restart) #ssl_key = './server.key' # Path to the SSL private key file # (change requires restart) #ssl_cert = './server.cert' # Path to the SSL public certificate file # (change requires restart) #ssl_ca_cert = '' # Path to a single PEM format file # containing CA root certificate(s) # (change requires restart) #ssl_ca_cert_dir = '' # Directory containing CA root certificate(s) # (change requires restart) #------------------------------------------------------------------------------ # POOLS #------------------------------------------------------------------------------ # - Pool size - num_init_children = 32 # Number of pools # (change requires restart) max_pool = 4 # Number of connections per pool # (change requires restart) # - Life time - child_life_time = 300 # Pool exits after being idle for this many seconds child_max_connections = 0 # Pool exits after receiving that many connections # 0 means no exit connection_life_time = 0 # Connection to backend closes after being idle for this many seconds # 0 means no close client_idle_limit = 0 # Client is disconnected after being idle for that many seconds # (even inside an explicit transactions!) # 0 means no disconnection #------------------------------------------------------------------------------ # LOGS #------------------------------------------------------------------------------ # - Where to log - log_destination = 'stderr,syslog' # Where to log # Valid values are combinations of stderr, # and syslog. Default to stderr. # - What to log - print_timestamp = on # Print timestamp on each line # (change requires restart) log_connections = on # Log connections log_hostname = on # Hostname will be shown in ps status # and in logs if connections are logged log_statement = on # Log all statements log_per_node_statement = off # Log all statements # with node and backend informations log_standby_delay = 'if_over_threshold' # Log standby delay # Valid values are combinations of always, # if_over_threshold, none # - Syslog specific - syslog_facility = 'LOCAL0' # Syslog local facility. Default to LOCAL0 syslog_ident = 'pgpool' # Syslog program identification string # Default to 'pgpool' # - Debug - debug_level = 0 # Debug message verbosity level # 0 means no message, 1 or more mean verbose #------------------------------------------------------------------------------ # FILE LOCATIONS #------------------------------------------------------------------------------ pid_file_name = '/var/run/pgpool/pgpool.pid' # PID file name # (change requires restart) logdir = '/tmp' # Directory of pgPool status file # (change requires restart) #------------------------------------------------------------------------------ # CONNECTION POOLING #------------------------------------------------------------------------------ connection_cache = on # Activate connection pools # (change requires restart) # Semicolon separated list of queries # to be issued at the end of a session # The default is for 8.3 and later reset_query_list = 'ABORT; DISCARD ALL' # The following one is for 8.2 and before #reset_query_list = 'ABORT; RESET ALL; SET SESSION AUTHORIZATION DEFAULT' #------------------------------------------------------------------------------ # REPLICATION MODE #------------------------------------------------------------------------------ replication_mode = off # Activate replication mode # (change requires restart) replicate_select = off # Replicate SELECT statements # when in replication or parallel mode # replicate_select is higher priority than # load_balance_mode. insert_lock = off # Automatically locks a dummy row or a table # with INSERT statements to keep SERIAL data # consistency # Without SERIAL, no lock will be issued lobj_lock_table = '' # When rewriting lo_creat command in # replication mode, specify table name to # lock # - Degenerate handling - replication_stop_on_mismatch = off # On disagreement with the packet kind # sent from backend, degenerate the node # which is most likely "minority" # If off, just force to exit this session failover_if_affected_tuples_mismatch = off # On disagreement with the number of affected # tuples in UPDATE/DELETE queries, then # degenerate the node which is most likely # "minority". # If off, just abort the transaction to # keep the consistency #------------------------------------------------------------------------------ # LOAD BALANCING MODE #------------------------------------------------------------------------------ load_balance_mode = on # Activate load balancing mode # (change requires restart) ignore_leading_white_space = on # Ignore leading white spaces of each query white_function_list = '' # Comma separated list of function names # that don't write to database # Regexp are accepted black_function_list = 'currval,lastval,nextval,setval' # Comma separated list of function names # that write to database # Regexp are accepted #------------------------------------------------------------------------------ # MASTER/SLAVE MODE #------------------------------------------------------------------------------ master_slave_mode = on # Activate master/slave mode # (change requires restart) master_slave_sub_mode = 'stream' # Master/slave sub mode # Valid values are combinations slony or # stream. Default is slony. # (change requires restart) # - Streaming - sr_check_period = 10 # Streaming replication check period # Disabled (0) by default sr_check_user = 'postgres' # Streaming replication check user # This is neccessary even if you disable streaming # replication delay check by sr_check_period = 0 sr_check_password = 'abcde' # Password for streaming replication check user delay_threshold = 10000000 # Threshold before not dispatching query to standby node # Unit is in bytes # Disabled (0) by default # - Special commands - follow_master_command = 'echo %d %h %p %D %m %H %M %P %r %R %%' # Executes this command after master failover # Special values: # %d = node id # %h = host name # %p = port number # %D = database cluster path # %m = new master node id # %H = hostname of the new master node # %M = old master node id # %P = old primary node id # %r = new master port number # %R = new master database cluster path # %% = '%' character #------------------------------------------------------------------------------ # PARALLEL MODE #------------------------------------------------------------------------------ parallel_mode = off # Activates parallel query mode # (change requires restart) pgpool2_hostname = '' # Set pgpool2 hostname # (change requires restart) # - System DB info - #system_db_hostname = 'localhost' # (change requires restart) #system_db_port = 5432 # (change requires restart) #system_db_dbname = 'pgpool' # (change requires restart) #system_db_schema = 'pgpool_catalog' # (change requires restart) #system_db_user = 'pgpool' # (change requires restart) #system_db_password = '' # (change requires restart) #------------------------------------------------------------------------------ # HEALTH CHECK #------------------------------------------------------------------------------ health_check_period = 1 # Health check period # Disabled (0) by default health_check_timeout = 20 # Health check timeout # 0 means no timeout health_check_user = 'postgres' # Health check user health_check_password = 'abcde' # Password for health check user health_check_max_retries = 2 # Maximum number of times to retry a failed health check before giving up. health_check_retry_delay = 5 # Amount of time to wait (in seconds) between retries. #------------------------------------------------------------------------------ # FAILOVER AND FAILBACK #------------------------------------------------------------------------------ failover_command = '/home/pgpool/failover.py -d %d -h %h -p %p -D %D -m %m -H %H -M %M -P %P -r %r -R %R' # Executes this command at failover # Special values: # %d = node id # %h = host name # %p = port number # %D = database cluster path # %m = new master node id # %H = hostname of the new master node # %M = old master node id # %P = old primary node id # %r = new master port number # %R = new master database cluster path # %% = '%' character failback_command = '/home/pgpool/failback.py -d %d -h %h -p %p -D %D -m %m -H %H -M %M -P %P -r %r -R %R' #failback_command = '' # Executes this command at failback. # Special values: # %d = node id # %h = host name # %p = port number # %D = database cluster path # %m = new master node id # %H = hostname of the new master node # %M = old master node id # %P = old primary node id # %r = new master port number # %R = new master database cluster path # %% = '%' character fail_over_on_backend_error = on # Initiates failover when reading/writing to the # backend communication socket fails # If set to off, pgpool will report an # error and disconnect the session. #------------------------------------------------------------------------------ # ONLINE RECOVERY #------------------------------------------------------------------------------ recovery_user = 'postgres' # Online recovery user recovery_password = 'abcde' # Online recovery password recovery_1st_stage_command = 'basebackup.sh' # Executes a command in first stage recovery_2nd_stage_command = '' # Executes a command in second stage recovery_timeout = 90 # Timeout in seconds to wait for the # recovering node's postmaster to start up # 0 means no wait client_idle_limit_in_recovery = 0 # Client is disconnected after being idle # for that many seconds in the second stage # of online recovery # 0 means no disconnection # -1 means immediate disconnection #------------------------------------------------------------------------------ # WATCHDOG #------------------------------------------------------------------------------ use_watchdog = on # Activates watchdog trusted_servers = '' # trusted server list which are used # to confirm network connection # (hostA,hostB,hostC,...) delegate_IP = '172.16.6.160' # delegate IP address wd_hostname = 'server1' # Host name or IP address of this watchdog wd_port = 9000 # port number for watchdog service wd_interval = 10 # lifecheck interval (sec) > 0 ping_path = '/bin' # ping command path ifconfig_path = '/sbin' # ifconfig command path if_up_cmd = 'ip addr add $_IP_$/32 dev eth0' #if_up_cmd = 'ifconfig eth0:0 inet $_IP_$ netmask 255.255.255.0' # startup delegate IP command if_down_cmd = 'ip addr del $_IP_$/32 dev eth0' #if_down_cmd = 'ifconfig eth0:0 down' # shutdown delegate IP command arping_path = '/usr/sbin' # arping command path arping_cmd = 'arping -U $_IP_$ -w 1' # arping command wd_life_point = 3 # lifecheck retry times wd_lifecheck_query = 'SELECT 1' # lifecheck query to pgpool from watchdog # Other pgpool Connection Settings other_pgpool_hostname0 = 'server0' # Host name or IP address to connect to for other pgpool 0 other_pgpool_port0 = 9999 # Port number for othet pgpool 0 other_wd_port0 = 9000 # Port number for othet watchdog 0 #other_pgpool_hostname1 = 'standby1' #other_pgpool_port1 = 5432 #other_wd_port1 = 9000 #------------------------------------------------------------------------------ # OTHERS #------------------------------------------------------------------------------ relcache_expire = 0 # Life time of relation cache in seconds. # 0 means no cache expiration(the default). # The relation cache is used for cache the # query result against PostgreSQL system # catalog to obtain various information # including table structures or if it's a # temporary table or not. The cache is # maintained in a pgpool child local memory # and being kept as long as it survives. # If someone modify the table by using # ALTER TABLE or some such, the relcache is # not consistent anymore. # For this purpose, cache_expiration # controls the life time of the cache. relcache_size = 256 # Number of relation cache # entry. If you see frequently: # "pool_search_relcache: cache replacement happend" # in the pgpool log, you might want to increate this number. check_temp_table = on # If on, enable temporary table check in SELECT statements. # This initiates queries against system catalog of primary/master # thus increases load of master. # If you are absolutely sure that your system never uses temporary tables # and you want to save access to primary/master, you could turn this off. # Default is on. #------------------------------------------------------------------------------ # ON MEMORY QUERY MEMORY CACHE #------------------------------------------------------------------------------ memory_cache_enabled = off # If on, use the memory cache functionality, off by default memqcache_method = 'shmem' # Cache storage method. either 'shmem'(shared memory) or # 'memcached'. 'shmem' by default memqcache_memcached_host = 'localhost' # Memcached host name or IP address. Mandatory if # memqcache_method = 'memcached'. # Defaults to localhost. memqcache_memcached_port = 11211 # Memcached port number. Mondatory if memqcache_method = 'memcached'. # Defaults to 11211. memqcache_total_size = 67108864 # Total memory size in bytes for storing memory cache. # Mandatory if memqcache_method = 'shmem'. # Defaults to 64MB. memqcache_max_num_cache = 1000000 # Total number of cache entries. Mandatory # if memqcache_method = 'shmem'. # Each cache entry consumes 48 bytes on shared memory. # Defaults to 1,000,000(45.8MB). memqcache_expire = 0 # Memory cache entry life time specified in seconds. # 0 means infinite life time. 0 by default. memqcache_auto_cache_invalidation = on # If on, invalidation of query cache is triggered by corresponding # DDL/DML/DCL(and memqcache_expire). If off, it is only triggered # by memqcache_expire. on by default. memqcache_maxcache = 409600 # Maximum SELECT result size in bytes. # Must be smaller than memqcache_cache_block_size. Defaults to 400KB. memqcache_cache_block_size = 1048576 # Cache block size in bytes. Mandatory if memqcache_method = 'shmem'. # Defaults to 1MB. memqcache_oiddir = '/var/log/pgpool/oiddir' # Temporary work directory to record table oids white_memqcache_table_list = '' # Comma separated list of table names to memcache # that don't write to database # Regexp are accepted black_memqcache_table_list = '' # Comma separated list of table names not to memcache # that don't write to database # Regexp are accepted